Free Standards Download

ASME A13.1:2007 pdf download Scheme for the Identification of Piping Systems OBJECT AND SCOPE This Standard is intended to establish a common system to assist in identification of hazardous materialsconveyed in piping systems and their hazards when...

ASME 2344-1:2007 pdf download Use ofSand Cast Aluminum Alloy A356.0, T6 Temper, for the Manufacture of Hot Water Heating Boilers Under Part HC Section IV Inquiry: May aluminum alloy A356.0 sand castings inthe T6 temper meeting the...

ASME B89.4.22:2004 pdf download Methods for Performance Evaluation of Articulated Arm Coordinate Measuring Machines 1 SCOPE The scope of this Standard pertains to the perform-ance evaluation of articulated arm coordinate measur-ing machines. While any number of rotational...

ASME SEC 1:2004 pdf download SUMMARY OF CHANGES The 2004 Edition of this Code contains revisions in addition to the 2001 Edition with 2002 and 2003 Addenda. The revisions are identified with the designation 04 in the...

ASME A17.1:2004 pdf download Supplement to ASME A17.1 - 2004 Safety Code for Elevators and Escalators 2.1.1.5 Strength of Enclosure.The hoistway enclosure adjacent to a landing opening shall be of sufficientstrength to maintain, in true lateral alignment,...

ASME A17.3:2005 pdf download Safety Code for Existing Elevators and Escalators Includes Requirements for Electric and Hydraulic Elevators and Escalators SECTION 1.3 PURPOSE AND EXCEPTIONS The purpose of this Code is to provide for the safetyof life...

ASME A18.1:2003 pdf download SAFETY STANDARD FOR PLATFORM LIFTS AND STAIRWAY CHAIRLIFTS INTRODUCTION 1.1 Scope 1.1.1 Equipment Covered by This Standard.Thissafety Standard covers the design, construction, installation, operation, inspection, testing, maintenance, andrepair of inclined stairway chairlifts and...

ASME A90.1:2003 pdf download SAFETY STANDARD FOR BELT M AIiILIFTS rated speed: the speed of the belt at which the manlift isdesigned to run (refer to para. 5.4). safety stop device: any electrical or electromechanicaldevice (such as...

ASME A112.4.14:2004 pdf download Manually Operated, Quarter-Turn Shutoff Valves for Use in Plumbing Systems 2.2 End Connections 2.2.1 Taper Pipe Threads. Metallic taper pipe threadsshall be in accordance with ASME B1.20.1.Plastic taperpipe threads shall be in accordance...

ASME A112.18.1:2003 pdf download PLUMBING FIXTURE FTTINGS 2.2.2 Electrodeposited Coatings on Plastics (a) Appearance. The significant surfaces of the platedarticle shall be free of surface defects, roughness, anduncoated areas, and shall not be stained. Except as notedin...