Free Standards Download

AIA/NAS 1831-2010 pdf download POST, ELECTRICAL, MECHANICAL EQUIPMENT CODE: A = ALUMINUM ALLOY, ANODIZED AC = ALUMINUM ALLOY, CHEMICAL CONVERSION COATED B = BRASS, CADMIUM PLATED BT = BRASS, TIN PLATED C = CORROSION RESISTANT STEEL, PASSIVATED...

AIA/NAS 1834-2010 pdf download INSERT, MOLDED IN, CSK AND THRU CLEARANCE HOLE, SANDWICH PANEL FINISH: CARBON STEEL - CADMIUM PLATE PER AMS-QQ-P-41 6, TYPE II, CLASS 2. AL ALLOY - ANODIZE PER MIL-A-8625, TYPE I, CLASS OPTIONAL....

AIA/NAS 1835-2010 pdf download INSERT, MOLDED IN, BLIND THREADED, SELF-LOCKING, NONSELF-LOCKING, FLOATING, SANDWICH PANEL NUT: CARBON TEEL PER ASTM A 108, ASTM A 76. OR MATERIAL COMPOSITION PER AIR4127 FED-STD-66ULTIMATE TENSILE STRENGTH 85 KSIMINIMUM. CORROSION RESISTANT STEEL...

AIA/NAS 1924-2010 pdf download CLAMP, HOSE MATERIAL: BAND AND SCREW HOUSING: TYPE 301 AUSTENITIC CRES (UNS S301 00) SCREW: TYPE 304/305 AUSTENITIC CRES (UNS S30400) (UNS S30500) OR 41 0 MARTENSITIC CRES (UNS S41 000) FINISH: CRES:...

AIA/NAS 1930-2010 pdf download RING, RETAINING (1) ALL DIMENSIONS ARE IN INCHES UNLESS OTHERWISE SPECIFIED. (2) TOLERANCES UNLESS OTHERWISE SPECIFIED, XX ±.03 (3) REMOVE ALL BURRS AND SHARP EDGES. (4) MARKING AND PACKAGING SHOULD BE IN ACCORDANCE...

AIA/NAS 4002-2010 pdf download NATIONAL AEROSPACE STANDARD SCOPE AND CLASSES This specification defines the requirements for alloy steel externally threaded fasteners procured under part numbersisted on drawings which refer to this specification. Typically these fasteners are used...

AIA/NAS 2813-2830-2010 pdf download BOLT, SHEAR, HEXAGON HEAD, CLOSE TOLERANCE, SHORT THREAD, 1 08 KSI Fsu FINISH: ALLOY STEEL - CADMIUM PLATE PER AMS-QQ-P-41 6, TYPE II, CLASS 2. BOLTS ARE NOT TO BE PICKLED. IMMEDIATELY AFTER...

AIA/NAS 4003-2010 pdf download FASTENER, A286 CORROSION RESISTANT ALLOY, EXTERNALLY THREADED, 1 60 KSI Ftu, 95 KSI Fsu, 1 000 °F SCOPE AND CLASSES This specification defines the requirements for corrosion resistant steel externally threaded fasteners procured...

AIA/NAS 9301-2010 pdf download RIVET, BLIND, PROTRUDING HEAD, MECHANICALLY LOCKED SPINDLE, BULBED STYLE A, CLASS 1 , CODE B AND EADD LETTER “B” AFTER BASIC PART NUMBER TO INDICATE 5056 ALUMINUM ALLOY SLEEVE AND 8740 ALLOY STEEL...

AIA/NAS 9312-2010 pdf download RIVET, BLIND, FLANGED DOME HEAD, MECHANICALLY LOCKED SPINDLE, BULBED, STYLE B, CLASS 4, CODE M CODES: RIVET MATERIAL AND FINISH CODES: ADD LETTER "M" AFTER BASIC PART NUMBER TO INDICATE NICKEL-COPPER ALLOY SLEEVE...