Free Standards Download

AIA/NAS 4466-2012 pdf download PIN, CRIMP, 1 00º CROWN SHEAR/TENSION HEAD MATERIAL: ALLOY STEEL: 4140 (UNS G41400) PER AMS6382, 4340 (UNS G43406) PER AMS6415 OR AMS6484, OR 8740 (UNS G87400) PER AMS6322, AMS6325 OR AMS6327. HEAT TREATMENT:...

AIA/NAS 4123-2012 pdf download HEAT SINK, ELECTRICAL-ELECTRONIC COMPONENT, SEMICONDUCTOR DEVICES, FOR DUAL INLINE PACKAGES (DIP) MATERIAL: EXTRUDED ALUMINUM ALLOY 2024 (UNS A92024), 6061 (UNS A96061 ) OR 6063 (UNS A96063) PER AMS-QQ-A-200, OR ALUMINUM SHEET OR PLATE...

AIA/NAS 5315-2006 pdf download SCREW, SHEAR, 100 DEG FLUSH HEAD, CLOSE TOLERANCE, SHORT THREAD, NAS1800 SIX LOBE RECESS, 95 KSI FSU CODE: BASIC PART NUMBER = SCREW，100 DEG FLUSH HEAD,NAS1800 SIX LOBE RECESS.MATERIAL CODE AFTER BASIC PART...

AIA/NAS 5316-2006 pdf download SCREW, SHEAR, 100 DEG FLUSH HEAD, CLOSE TOLERANCE, SELF-LOCKING, NAS1800 SIX LOBE RECESS, 95 KSI FSU MATERIAL: CRES - A286 (UNS 66286) CONFORMING TO THE CHEMISTRY OF AMS 5731，AMS 5732,AMS 5737 OR AMS...

AIA/NAS 44-2011 pdf download BUSBAR, ELECTRICAL MATERIAL: NO LETTER = SOFT COPPER SHEET, ASTM B1 52/B1 52M ANNEALED 025. “A” = ALUMINUM ALLOY SHEET (UNS A93003) AMS-QQ-A-250/2, 3003 TEMPER H1 4 LIGHT COLD ROLLED. FINISH: (WHEN SPECIFIED)...

AIA/NAS 380-2011 pdf download NAS DOCUMENTS, PREPARATION AND MAINTENANCE, IN THE INCH SYSTEM OF UNITS 1 . SCOPE 1 .1 Purpose. The standard practices established in this document provide means of obtaining uniformity in the preparation and...

AIA/NAS 494-2011 pdf download TERMINAL, BALL TYPE CABLE MATERIAL: CORROSION-RESISTING STEEL PER PROCUREMENT SPECIFICATION.HEAT TREATMENT: BRIGHT ANNEAL AFTER MACHINING SLIGHT DISCOLORATION DUE TO ANNEALING SHALL NOT BE CAUSE FOR REJECTION. FINISH: PER PROCUREMENT SPECIFICATION. NOTES: (1) NOT...

AIA/NAS 498-2011 pdf download FASTENERS, ALLOY STEEL EXTERNALLY THREADED, 95 KSI Fsu, 450 °F This specification defines the requirements for alloy steel externally threaded fasteners procured under part numbersisted on drawings which refer to this specification. Typically...

AIA/NAS 516-2011 pdf download FITTING, LUBRICATION, .1 250 INCH DRIVE, FLUSH TYPE CADMIUM PLATE PER AMS-QQ-P-416,TYPE IICLASS 2,DYE OLIVE DRABNICKEL PLATE PER AMS 2423,0.0002 MINIMUM THICKNESSBALL DYE REDZINC PLATE PER ASTM B 633,CLASS 2TYPE III,NATURAL CLEAR COLORZINC-NICKEL...

AIA/NAS 518-2011 pdf download GAGE, 1 00 DEGREES FLAT HEAD FLUSHNESS MATERIAL: TOOL STEEL HEAT TREAT: 60–62 HRC NOTES: (1 ) “ØA” MAY BE ALTERED IF DESIRED. (2) MARK PERMANENTLY WITH COMPLETE PART NUMBER. (3) DASH NUMBERS...