Free Standards Download

AIA/NAS 901-2013 pdf download TELESCOPES AND COLLIMATORS FOR OPTICAL TOOLING ALL OUTSIDE DIAMETERS TO FIT THE SPHERICAL MOUNTS SHALL BE 2.2493 TO 2.2498 INCHESTHE CENTERLINE OF SIGHT SHALL BE LOCATED AT TRUE POSITION WITHIN .001 DIAMEER IN...

AIA/NAS 908-2013 pdf download GLOSSARY OF OPTICAL TOOLING TERMS ABERRATION THE FAILURE OF RAYS OF LIGHT COMING FROM ONE POINT THROUGH A LENS OR REFLECTING FROM A MIRROR. TO CONVERGE TO ONE FOCUS. ALIGNING BRACKETA CLAMPING AND/OR...

AIA/NAS 938-2013 pdf download MACHINE AXIS AND MOTION NOMENCLATURE 10 SCOPE Purpose: This specification covers axis and motion nomenclature for numerically controlled equipmentThese requirements are intended to standardize programming and facilitate the interchangeability ofprograms by prescribing the...

AIA/NAS 941-2013 pdf download IDENTIFICATION MARKING OF TITANIUM SHEET PURPOSE To provide a uniform method of physically marking titanium sheet to assure positive identification of entire sheetsor small remnants. MARKING FLUIDS Marking shal be applied by means...

AIA/NAS 942-2013 pdf download STRAIN GAGES, BONDED RESISTANCE SCOPE Purpose The purpose of this document is to provide a standard for specifying bonded resistance strain gages. In accomplishing the purpose of this document, it is necessary to:...

AIA/NAS 953-2013 pdf download NUMERICAL CONTROL SYSTEM SCOPE Purpose This specification provides a standard for the manufacture, performance, reliability, inspection and procurement ofNumerical Control Systems. This standard lists minimum requirements and is not intended to limit design...

AIA/NAS 954-2013 pdf download NUMERICALLY CONTROLLED HORIZONTAL BORING, DRILLING AND MILLING MACHINE SCOPE Purpose This specification provides a standard for the manufacture, performance, reliability, inspection, and procurement ofnumerically controlled horizontal boring. driling, and milling machine(s). This standard...

AIA/NAS 970-2013 pdf download TOOL HOLDERS-BASIC FOR NUMERICALLY CONTROLLED MACHINE TOOLS 1 .0 SCOPE 1 .1 Purpose: This specification pertains to the standardization of tool holders—basic for numerically controlled machine tools. The requirements contained herein are intended...

AIA/NAS 979-2013 pdf download UNIFORM CUTTING TESTS - NAS SERIES METAL CUTTING EQUIPMENT SPECIFICATIONS 1.0 SCOPE PURPOSE: THIS SPECIFICATION PROVIDES A STANDARD FOR THE SELECTION OF CUTTINGTESTS REQUIRED TO EVALUATE THE PERFORMANCE OF CONVENTIONAL ANDNUMERICALLY CONTROLLED MACHINE...

AIA/NAS 983-2013 pdf download STANDARD FORMAT FOR NAS 900 SERIES NONE EQUIPMENT SPECIFICATIONS In Section 2.0,"Applicable Specifications,Codes, and Standards'reference other paragraphs/sections of the specification to whicha given code or standard is applicable. In other sections of the...