Free Standards Download

IEEE 1471-2000 pdf download Recommended Practice for Architectural Description of Software-Intensive Systems Each viewpoint is specified by : – Viewpoint name – The stakeholders addressed by the viewpoint – The stakeholder concerns to be addressed by the viewpoint – The viewpoint language, modeling techniques, or analytical methods used – The source, if any, of the viewpoint (e.g., author, literature citation) ♦ A viewpoint may also include : – Any consistency or completeness checks associated with the underlying method to be applied to models within the view – Any evaluation or analysis techniques to be applied to models within the view – Any heuristics, patterns, or other guidelines which aid in the...

IEEE 1476-2000 pdf download IEEE Standard for Passenger Train Auxiliary Power Systems Interfaces 1.Overview This standard applies to new procurements or major rehabilitation of rail-transit vehicles occurring on orafter the publication date of this standard. Existing rail-transit...

IEEE 1478-2001 pdf download IEEE Standard for Environmental Conditions for Transit Rail Car Electronic Equipment 4.1.4 Vibration Equipment shall withstand the Table 1 vibration environments in all shipping, storage and operating modes without damage, degradation, or abnormal...

IEEE 1483-2000 pdf download IEEE Standard for Verification of Vital Functions in Processor-Based Systems Used in Rail Transit Control 3.1.10 mean time between hazardous events (MTBHE): The average time between occurrences of eventswhere hazardous events and the...

IEEE 1538-2000 pdf download IEEE Guide for Determination of Maximum Winding Temperature Rise in Liquid-Filled Transformers 3. Definitions 3.1 average winding temperature rise: The arithmetic difference between the average winding temperatureand the ambient temperature as determined from...

IEEE 1580-2001 pdf download IEEE Recommended Practice for Marine Cable for Use on Shipboard and Fixed or Floating Platforms 5. Cable construction 5.1 Conductors 5.1.1 General The conductors should be of soft annealed copper wire. All conductors...

IEEE C37.10.1-2000 pdf download IEEE Guide for the Selection of Monitoring for Circuit Breakers 1.Scope This guide provides direction for the selection of monitoring and for diagnostic parameters to be used withhigh-voltage circuit breakers (i.e, above 1000...

IEEE C37.20.3-2001 pdf download IEEE Standard for Metal-Enclosed Interrupter Switchgear 3.5.2 design tests: Tests made by the manufacturer to determine the adequacy of the design of a particulartype, style, or model of equipent or its component parts...

IEEE C37.20.4-2001 pdf download IEEE Standard for Indoor AC Switches (1 kV–38kV) for Use in Metal-Enclosed Switchgear 3. Definitions The definitions of terms contained in this standard, or in other standards referred to in this standard,are not...

IEEE C37.90.3-2001 pdf download IEEE Standard Electrostatic Discharge Tests for Protective Relays 1. Scope This standard specifies design tests for clectrostatic discharge (ESD) tests of protective relays and relaysystems. The object of the type test described in...