Free Standards Download

IEEE 1610-2007 pdf download IEEE Guide for the Application of Faulted Circuit Indicators for 200 / 600 A, Three-phase Underground Distribution 2.Definitions For the purpose of this guide, the following terms and definitions apply. The Authoritative Dictionary...

IEEE 1542-2007 pdf download IEEE Guide for Installation, Maintenance, and Operation of Irrigation Equipment Located Near or Under Power Lines 1.1 Scope The guide is based on industry practices and presents guidelines for installation, maintenance, andoperation of...

IEEE 1070-2006 pdf download IEEE Guide for the Design and Testing of Transmission Modular Restoration Structure Components Any steel used in fabrication of the gimbal joints should conform to specifications given inASTM A36/A36MAfter fabrication, all steel should...

IEEE 762-2006 pdf download IEEE Standard Definitions for Use in Reporting Electric Generating Unit Reliability, Availability, and Productivity 1.1 Scope This document standardizes terminology and indexes for reporting electric generating unit reliability.availability, and productivity performance measures while...

IEEE 741-2007 pdf download IEEE Standard Criteria for the Protection of Class 1E Power Systems and Equipment in Nuclear Power Generating Stations 5. Principal design criteria and requirements 5.1 AC power distribution systems 5.1.1 Switchgear and bus...

IEEE 649-2006 pdf download IEEE Standard for Qualifying Class 1E Motor Control Centers for Nuclear Power Generating Stations 3. Definitions The glossary in Annex B and The Authoritative Dictionary of IEEE Standards Terms should be referencedfor terms...

IEEE 592-2007 pdf download IEEE Standard for Exposed Semiconducting Shields on High-Voltage Cable Joints and Separable Connectors 1.Scope This standard covers design tests for shield resistance and a simulated fault-current initiation for exposedsemiconducting shields used on cable...

IEEE 572-2006 pdf download IEEE Standard for Qualifcation of Class 1E Connection Assemblies for Nuclear Power Generating Stations 1. Overview 1.1 Scope This standard provides basic requirements, direction, and methods for qualifying Class lE ConnectionAssemblies for service...

IEEE 495-2007 pdf download IEEE Guide for Testing Faulted Circuit Indicators 1. Overview Faulted circuit indicators (FCIs) used by the electric utility industry are applied to overhead andunderground power distribution circuits. This guide describes the general test...

IEEE 338-2006 pdf download IEEE Standard Criteria for Periodic Surveillance Testing of Nuclear Power Generating Station Safety Systems 3.6 go/no-go: A set of terms (in colloquial usage) referring to the condition or state of operability of a...