Free Standards Download

AIA/NAS 1407-2011 pdf download PIN, SPRING, COILED MATERIAL: CARBON STEEL AND CORROSION RESISTANT STEEL IN ACCORDANCE WITH PROCUREMENT SPECIFICATION. FINISH: (IN ACCORDANCE WITH PROCUREMENT SPECIFICATION) CARBON STEEL-BLACK OILED OR CADMIUM PLATED CORROSION RESISTANT STEEL-PASSIVATED EXAMPLE OF PART...

AIA/NAS 1410-2011 pdf download NUT, UNIVERSAL PORT FITTING TEMPERATURE RANGE: −65 °F TO +325 °F FOR PRESSURES UP TO 3000 PSI, AND −65 °F TO +350 °F FOR PRESSURES UP TO 500 PSI FINISH: ALUMINUM: ANODIZE PER...

AIA/NAS 1413-2011 pdf download RADIOGRAPHIC STANDARDS FOR ALUMINUM ALLOY CASTINGS The casting radiographic quality grades shown herein may be called out on the engineering drawings and wilthereby define the maximum acceptable limit for each class of defect...

AIA/NAS 1433-2011 pdf download RADIOGRAPHIC STANDARDS FOR ALUMINUM ALLOY CASTINGS The casting radiographic quality grades shown herein may be called out on the engineering drawings and will thereby define the maximum acceptable limit for each class of...

AIA/NAS 1495-2011 pdf download RECOMMENDED QUALIFICATION TEST PROCEDURE FOR COMPLIANCE WITH NAS SPECIFICATIONS AND STANDARD DRAWINGS The witnesses shall consist of at least the following: A member of the contractor's Quality Control or inspectionDepartment and one engineer....

AIA/NAS 1514-2011 pdf download RADIOGRAPHIC STANDARD FOR CLASSIFICATION OF FUSION WELD DISCONTINUITIES SCOPE This specification defines and establishes the allowable limits for discontinuities in fusion welded ioints asdetermined by radiographic inspection. The specification is applicable to fusion...

AIA/NAS 1553-2011 pdf download KNOB, HAND, GROUND SUPPORT EQUIPMENT MATERIAL: FINISH: CODE: ALLOY STEEL - 80 KSI MINIMUM TENSILE STRENGTHALUMINUM ALLOY - 356-T6 (UNS A03560), GQ-A601 ASTM B 26/B 26M CLASS 3M OR EQUIVALENT.MALLEABLE OR CAST IRON....

AIA/NAS 1554-2011 pdf download GROMMET, PTFE, SPLIT MATERIAL: POLYTETRAFLUOROETHYLENE (PTFE) IN ACCORDANCE WITH AMS3660 OR AMS3667. EXAMPLE OF PART NUMBER: NAS1 554-3 A = SPLIT PTFE GROMMET HAVING Ø.1 88 INSTALLED ID FOR INSTALLATION IN A Ø.234...

AIA/NAS 1563-2011 pdf download GAGES, PINS AND COLLAR INSPECTION, SWAGE LOCKING 1 . SCOPE 1 .1 Purpose. This standard practice classification establishes the requirements of dimensional design and instructional usage for swage locking pins and collar inspection...

AIA/NAS 1636-2011 pdf download WASHER, KEY, DUAL TAB MATERIAL: CRES – 304 (UNS S30400) PER QQ-S-766 ASTM A 240/A 240M. FINISH: PASSIVATE PER AMS2700, METHOD 1 , CLASS 4. EXAMPLE OF PART NUMBER: NAS1 636-1 = CRES...