Free Standards Download

AIA/NAS 831-2013 pdf download CAP, PROTECTIVE, ELECTRICAL CONNECTOR COLOR: POLYETHYLENE – RED ELECTROSTATIC FREE – PINK CONDUCTIVE – BLACK CONDUCTIVE NON-SLOUGHING – GREEN CODE: NO LETTER AFTER DASH NUMBER FOR POLYETHYLENE ADD “B” AFTER DASH NUMBER FOR...

AIA/NAS 851-2013 pdf download GENERAL PACKAGING STANDARD INDEXES 1 . SCOPE 1 .1 Purpose This standard establishes the following indexes: 1 .1 .1 Commodities and their assigned detail packaging standards – alphabetical 1 .1 .2 Packaging standards,...

AIA/NAS 852-2013 pdf download QUALITY ASSURANCE, GENERAL GUIDANCE SCOPE This standard provides general guidance for checking quality compliance with the requirements of all NASsupplier packaging standards. PURPOSE 2The purpose of this standard is to provide a recommended...

AIA/NAS 853-2013 pdf download FIELD FORCE,PROTECTION FROM 1 .0 SCOPE 1 .1 This Standard provides a method for the protection of items, components and assemblies, e.g., field effect transistors, micro diodes, etc., which may be damaged by...

AIA/NAS 876-2013 pdf download ALIGNMENT LASERS FOR OPTICAL TOOLING ALL OUTSIDE DIAMETERS TO FIT SPHERICAL MOUNTS SHALL BE 2.2493 TO 2.2498.POWER OUTPUT SHALL NOT EXCEED FOOD AND DRUG ADMINISTRATION (FDA) PERFORMANCE STANDARD21CFR1040.10 AND 1040.11 FOR CLASS II...

AIA/NAS 883-2013 pdf download MIRROR TARGETS, OPTICAL TOOLING FRONT SURFACE AND PLANO-PARALLEL FRONT SURFACE OPTICALLY FLAT TO 1/4 WAVELENGTH OF HELIUM-NEON LASER WAVELENGTH (6328A). POLISH SURFACE QUALITY10-5(REFMIL-PRF-13830) PLANO-PARALLEL EACH SURFACE TO BE OPTICALLY FLAT TO 1/4 WAVELENGTH...

AIA/NAS 886-2013 pdf download JIG TRANSIT & JIG TRANSIT SQUARES FOR OPTICAL TOOLING、 JIG TRANSITS AND JIG TRANSIT SQUARES SHALL BE FABRICATED TO,OR HAVE ADJUSTMENT CAPABILITY TO ACHIEVE THEFOLLOWING ACCURACIES: VERTICAL AND HORIZONAL RETICLE CROSS HAIR PATTERNS...

AIA/NAS 888-2013 pdf download SIGHT LEVELS FOR OPTICAL TOOLING SIGHT LEVELS SHALL BE FABRICATED TO, OR HAVE ADJUSTMENT CAPABILITY TO ACHIEVE THE FOLLOWINGACCURACIES: VERTICAL AND HORIZONTAL RETICLE CROSS HAIR PATTERNS TO BE ORTHOGONAL TO WITHIN土1/2°AND THE HORIZONTAL...

AIA/NAS 901-2013 pdf download TELESCOPES AND COLLIMATORS FOR OPTICAL TOOLING ALL OUTSIDE DIAMETERS TO FIT THE SPHERICAL MOUNTS SHALL BE 2.2493 TO 2.2498 INCHESTHE CENTERLINE OF SIGHT SHALL BE LOCATED AT TRUE POSITION WITHIN .001 DIAMEER IN...

AIA/NAS 908-2013 pdf download GLOSSARY OF OPTICAL TOOLING TERMS ABERRATION THE FAILURE OF RAYS OF LIGHT COMING FROM ONE POINT THROUGH A LENS OR REFLECTING FROM A MIRROR. TO CONVERGE TO ONE FOCUS. ALIGNING BRACKETA CLAMPING AND/OR...