Free Standards Download

SAE AS 9732-2000 pdf download BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CRES AMS 5643, .190-32 UNJF-3A SHANK SHALL BE STRAIGHT WITHIN .003 FIR. PER INCH OF BOLT LENGTH. THE RUNOUT OF THREAD PD...

SAE AS 9751-2000 pdf download BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, TITANIUM AMS 4967, .250-28 UNJF-3A 1. SHANK SHALL BE STRAIGHT WITHIN .003 PER INCH OF BOLT LENGTH. 2. THE RUNOUT OF THREAD...

SAE AS 9895-2000 pdf download BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, AMS 5616, .250-28 UNJF-3A 1.SHANK SHALL BE STRAIGHT WITHIN .003 PER INCH OF BOLT LENGTH 2. THE CONCENTRICITY OF THREAD PD IN RELATION...

SAE AS 9944-2000 pdf download BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, FULL SHANK, STEEL AMS 6322, CADMIUM PLATED, .375-24 UNJF-3A 1. SHANK SHALL BE STRAIGHT WITHIN .0025 TOTAL PER INCH OF BOLT LENGTH. 2....

SAE AS 14169-2000 pdf download CIRCULAR SPLINE AND ADAPTER DETAILS ENGINE DRIVEN ACCESSORIES NOTES 1. DIMENSIONS ALL LINEAR DIMENSIONS ARE IN INCHES EXCEPT ROUGHNESS WHICH ARE IN MICROINCHES. 2. APPLICATION THE SPECIFIED ADAPTERS MAY BE USED ONLY...

SAE AS 14184-2000 pdf download NONMETALLIC SHAFT-COUPLING DETAILS, ENGINE DRIVEN ACCESSORIES SPLINES. MALE SHAFT SPLINES SHALL HAVE A MINIMUM SURFACE HARDNESS OF 34 ROCKWELL C TO A MINIMUMCASE DEPTH OF 0035 INCHES 2. MATERIAL SELECTION THE PLASTIC...

SAE AS 14241-2000 pdf download CLAMP, LOOP TYPE, CUSHIONED SUPPORT, METRIC 1.MATERIAL: a)BAND THE BAND SHALL BE FABRICATED EROM ALUMINUM ALLOY.OR CORROSION RESISTANT STEEL INACCORDANCE WITH THE PROCUREMENT DOCUMENT. b) CUSHION THE CUSHION SHALL BE FABRICATED FROM...

SAE AS 17320-2000 pdf download MOUNTING DEVICES FOR AIRCRAFT ELECTRIC EQUIPMENT, QUICK ATTACH-DETACH, CIRCULAR, 5-, 8-, AND 10-INCH NOTES: 1. SPECIFICATION: DATA FOR MIL-E-81099 ARE AS FOLLOWS (INITIAL NUMBERS REFER TO PARAGRAPHS OF THE SPECIFICATION) 1.2 CLASSIFICATION:...

SAE AS 21919-2000 pdf download CLAMP, LOOP TYPE, CUSHIONED SUPPORT NOTES: 1. MATERIAL: BAND: a. CODE LETTER C - TYPE 321 CORROSION RESISTANT STEEL PER AMS 5510 b. CODE LETTER D - 2024-0 ALUMINUM ALLOY PER AMS-QQ-A-250/5...

SAE AS 21939-2000 pdf download BOLT, CLUSTER FITTING, SINGLE PORT, THROUGH, FLARELESS REQUIREMENTS: MATERIAL: ALUMINUM ALLOY - BARS.SEE PROCUREMENT SPECIFICATION. FINISH:SEE PROCUREMENT SPECIFICATION.2. SURFACE FINISH IN ACCORDANCE WITH ANSI B46.1UNLESS OTHERWISE SPECIFIED，ALL OUTSIDE MACHINED SURFACES SHALL BE125...