BS/EN 50632-2-17-2016 pdf download.Electric motor-operated tools Dust measurement procedure Part 2-17: Particular requirements for routers and trimmers.
This clause of Part 1 is applicable except as follows:
Addition:
This part of EN 50632 applies to routers and trimmers
2 Normative references
This clause of Part I is applicable except as follows:
Addition:
EN 312:2010. Particleboards – Specifications
3 Terms and definitions
This clause of Part 1 is applicable except as follows:
3.101
router
tool with a base and a collet, designed to be fitted with a rotary cutting bit intended for cutting slots into or shaping the edge of various materials
3.102
trimmer
tool with a base and collet designed to be fitted with a rotary cutting bit intended for trimming the edge of laminate sheet or similar materials
4 Test procedure
This clause of Part 1 is applicable except as follows:
4.3 Operating conditions
Addition:
Routers intended for cutting wood are tested under load observing the conditions shown in Table 101.
5 Instrumentation
This clause of Part I is applicable.
6 Information to be reported
This clause of Part 1 is applicable except as follows:
p) Modification:
Information about extension of the cycle time in case the required number of operations could not be achieved within 10 mm.BS/EN 50632-2-17-2016 pdf download.
BS/EN 50632-2-17-2016 pdf download
PS:Thank you for your support!
