EN 2609-1988 pdf download.Aerospace series Turnbarrels control cable In copper-zinc alloys Dimensions and loads.
This EN 2609 specifies the characteristics of turnbarrels in copper-zinc alloys intended for aircraft control cables.
2 References
Iso 426-2:1983, Wrought copper-zinc alloys — tZ’he,nical composition and forms of wrought products — Part 2: Leaded copper-zinc alloys.
Iso 1637:1974, Wrought copper and copper alloys — Solid product supplied in straight lengths — Mechanical properties.
Iso 2020, Aerospace — Mechanical system parts — Preformed flexible steel wire rope for aircraft controls — Technical specification.
ISO 5855-1, Aerospace construction — M.J th reads — Part 1: Basic profile.
ISO 5855-2, Aerospace construction — M.J threads — Part 2: Dimensions for bolts and nuts.
EN 2363, Aerospace series — Locking clips for turnbuckles of control cables Dimensions.
EN 2569, Aerospace series — Control cable fittings and turn barrel assemblies — Technical specification’.
3 Required characteristics
3.1 Dimensions — Tolerances — Loads — Mass
The configuration shall correspond to the Figure and the dimensions shall conform to the values given in
the Figure and the Table.
3.2 Surface roughness
See Figure.
3.3 Material
Copper-zinc alloys ISO 426-2 and ISO 1637 (Cu Zn 39 Pb2).
5 Marking
In addition to the manufacturer’s own marking, each turnbarrel shall be marked (see Figure) using the
identity block as defined in clause 4 of this standard. The marking method is at the manufacturer’s option.
6 Technical specification
The turnbarrels supplied according to this standard shall conform with the requirements of EN 2569.EN 2609-1988 pdf download.

Share on Facebook

Post on X

Follow us

Save