Vacuum carburizing of gears has typically been limited to parts with relatively small cross-sections. Most
alloys currently in use require oil quenching to achieve adequate surface hardness and core properties in
large gear applications. Pit or large batch IQ furnaces with endothermic atmospheres are often used to
process this type of gear. The majority of vacuum carburizing equipment is designed for processing
smaller parts with a high pressure gas quench.
Recent equipment and process developments allow vacuum carburizing and oil quenching of very large
gears and pinions – up to 70” diameter and 7,000 lbs. Fixture design and careful process control help
minimize distortion, while providing the case uniformity and surface integrity that is unique to vacuum
carburizing.
This paper will discuss specific case studies involving large gears and pinions. Distortion, case hardness
profiles and microstructures from conventional gas carburizing and vacuum carburizing will be examined
and compared.

Share on Facebook

Post on X

Follow us

Save