ANSI INCITS 370-2004 pdf download ATA/ATAPI Host Adapters Standard (ATA – Adapter)
1 Scope
This standard specifies the AT Attachment Interface between host systems using Automatic Direct Memory Access (ADMA) and storage devices. It provides a common link layer interface for systems manufacturers, system integrators, and software suppliers. The application environment for the AT Attachment Interface is any host system that has a PCI bus and storage devices contained within the processor enclosure.
This standard maintains a high degree of compatibility with the AT Attachment with Packet Interface – 6 standard (ATA/ATAPI-6), ANSI INCITS 361-2002, and while specifying link-layer register definitions and usage information, is not intended to require changes to presently installed devices.
2 Normative References
2.1 Content Imported from Normative Standards Where material within this standard has been imported from another normative standard, in whole or in part, it is done so for the sake of readability of this document and the normative source document is identified. The source standard has precedence where there is a difference of definition. References are listed in this section. Each reference has an abbreviated reference form, enclosed within braces ‘{}’. This abbreviation, braces included, is used in the body of this document. Where the reference cites a standard and working drafts, the cross-reference is to the standard that was current at the time when this document was written.
2.2 Industry Standard References
2.2.1 ANSI Information Technology – AT Attachment with Packet Interface (ATA/ATAPI-5)
Abbreviation: {ATA Standard}
Published standard: Information Technology – AT Attachment with Packet Interface – 5 (ATA/ATAPI-5),American National Standard for Information Systems, ANSI INCITS 340-2000.
Standard: Information Technology – AT Attachment Interface with Packet Interface Extensions – 6 (ATA/ATAPI-6), ANSI INCITS 361-2002
2.2.2 PCI Local Bus Specification
Abbreviation: {PCI Spec}
Standard for the PCI Local Bus, Revision 2.3, published October 19, 2001, by the PCI Special Interest Group (PCI SIG).
This standard is freely available and can be downloaded from www.pcisig.org
2.2.3 PCI Hot-Plug Specification
Abbreviation: {PCI Hot Plug}
Standard for the PCI Local Bus, Revision 1.0, published October 6, 1997, by the PCI Special Interest Group (PCI SIG).
This standard is freely available and can be downloaded from www.pcisig.org
2.2.4 PCI Bus Power Management Specification
Abbreviation: {PCI PMS}
Standard for the PCI Local Bus – Revision 1.1, published December 18, 1998, by the PCI Special Interest Group (PCI SIG).
This standard is freely available and can be downloaded from www.pcisig.org
3 Definitions, Abbreviations, and Conventions
3.1 Definitions and Abbreviations
3.1.1 ADMA
Automatic Direct Memory Access
ANSI INCITS 370-2004 pdf download
PS:Thank you for your support!
