ANSI AIIM MS62-1999 pdf download Recommended Practice for COM Recording Systems Having an Internal Electronic Forms Generating System Operational Practices for Inspection and Quality Control
1 Scope
This American National Standard describes the components of a software test form to be used in COM recorder systems that can accept electronic forms. The software test form serves to generate by electronic means an image corresponding to the components of the form as defined in this American National Standard. The components have been designed to check or test certain capabilities of the COM recorder system to assure that good image quality is being obtained and that during the use of the COM recorder system, the quality is being maintained. The recording method (i.e., laser scanner method, cathode ray tube method, light emitting diode method, or the like) is not relevant in establishing the software test form components. The test target form could also complement the quality control of alphanumeric COM recorder systems that use a hard test form slide, such as that described in ANSI/AIIM MS28.
2 References
2.1 Referenced American National Standards
ANSI/AIIM MS1 -1 996, Recommended Practice for Alphanumeric Computer-Output Microforms Opera- tional Practices for Inspection and Quality Control.
ANSI/AIIM MS28-1 996, American National Standard for Information and Image Management Alphanu- meric COM Quality Test Slide.
ANSI/AIIM MS43-1 998, Standard Recommended Practice — Operational Procedures Inspection and Quality Control of Duplicate Microforms of Documents and From COM.
ANSI/AIIM TR2-1 998, Technical Report for Information and Image Management — Glossary of Docu- ment Technologies.
ANSI/NAPM IT2.1 8-1 996, Photography  Density Measurements Part 3: Spectral Conditions (revision and redesignation of ANSI/ISO 5-3-1 984, ANSI PH2.1 8-1 985) (ISO 5-3:1 995, Photography  Density measurements Part 3: Spectral conditions).
ISO/DIS 851 4-2, Micrographics  Alphanumeric computer output microforms Quality control Part 2: Method.
3 Definitions
For the purposes of this American National Standard, the terms and definitions given in ANSI/AIIM TR2 and the following apply.
3.1
COM
computer output microfilm  data generated on a computer that is output to microfilm by a recording system that generates images by CRT, laser, LED, or other means.
3.2
dpi
dots per inch
NOTE When applied to COM applications, this term is generally intended to mean the number of dots per inch in the full equivalent original size, not the dots per inch as actually recorded on film.
3.3
hard form
any type of form that exists as a physical entity, usually on glass for projection purposes or paper.

Share on Facebook

Post on X

Follow us

Save