1 Scope, Purpose, and Application
1.1 Scope The requirement of this standard shall apply to all film casting, cast embossing, laminating and extrusion coating machinery (Machinery). Safety requirements of ancillary equipment used with the Machinery are not covered by this standard. 1.2 Purpose The purpose of this standard is to identify and address known hazards to personnel working on, or adjacent to the Machinery.
1.3 Application
1.3.1 New Installation The requirements of this standard pertaining to manufacturer shall apply to all new or remanufactured Machinery installed in the United States, of America. Compliance shall be achieved within one year of the approval date of this standard. Date of shipment (month and year) shall be affixed to the Machine permanently and legibly along with the name of the manufacturer or remanufacturer.
1.3.2 Existing Installations The employer is responsible for bringing existing Machines into compliance with the requirements of this standard within three years of the approval date of this standard with the following specific exception: – the 4-inch dimension referred to in 3.1 and 5.3.1.2 shall be changed to 3 inches.
1.3.3 All Installations An employer shall not operate a Machine or permit it to be operated unless it is in compliance with this standard.

Share on Facebook

Post on X

Follow us

Save