IEEE 1325-2002 pdf download

01-11-2023 comment

IEEE 1325-2002 pdf download IEEE Recommended Practice for Reporting Field Failure Data for Power Circuit Breakers
1. Overview
Actual practices of power switchgear users in documenting field failures and failures of switchgear and other powerdelivery products vary widely, In order to restore failed elements to service, the emphasis often is to “clean up” aailure quickly, losing important data that is critical to corrective action. There is a real need for more depth in recordkeeping to improve reliability of power handling equipment. This recommended practice addresses this need.
1.1 Scope
A Failure Reporting Form, figures 1 and 2, has been developed by the IEEE Switchgear Committee to improve thereliability of circuit breakers through uniform reporting of field failures. The use of this approach is the recommendedpractice for all users of power circuit breakers.
1.2 Purpose
The use of the Failure Reporting Form, included in this document, is recommended to standardize reporting of fieldfailures and to use these experiences to improve the reliability of power circuit breakers.
2. References
This recommended practice shall be used in conjunction with the following publications:IEEE Std C37.100-1992,IEEE Standard Definitions for Power Switchgear (ANSI).
3.Definitions
For definitions applying to this standard, refer to IEEE Std C37.100-1992
4.Recommended practice
4.1 Background
The form, figures I and 2, is derived from the experiences and with the approval of both manufacturers and users. Itsmain goals and requirements are to be simple to use, to deine the field failure including its related environment, ancto establish records and references for further analysis and action should the situation repeat itself or as other factorssurface.
4.2 General
Details of the one-page reporting form have been carefully developed by users and manufacturers to arrive at an easyto-use format that will contain enough information to understand the defined problem.
Although serious systems-related failures will require engineering input for figure 2, it is expected that the fieldmaintenance person will complete the front side of the form, figure 1. The back side, figure 2, should be completed bythe user’s maintenance personnel with assistance, if required, from others
The completed form, figures 1 and 2, should be sent to the person in the user’s organization who monitors fieldperformance of installed equipment, lt should be used to analyze the reported failures and communicate incidentspecific information to the manufacturer, as appropriate, when there is a repetitive or serious problem.
4.3 Description of form
The front side, figure l, is to be filled out for all failures and is an adequate report for minor malfunctionsnonconformances,or nonsystem related failures
The back side, figure 2. is useful for further elaboration of major failures that are more complex, with considerationgiven to system interaction.
Both figures may be incorporated on a single sheet of paper and bound into pads for easy availability.
5.Implementation
Users should use this form, figures 1 and 2, as a record and feedback system to improve equipment reliability
Every effort should be made to promptly obtain and sort reports so that failures are prioritized to identify thosedeserving the most immediate attention. The success of this activity depends on a cooperative effort between the user’smaintenance and operations people and the original manufacturer, when their involvement is needed.
The front side, figure 1, should be filled out by maintenance personnel. A minimum of instruction or guidance isrequired.

                                           Related Information                                             Download
PS:Thank you for your support!
IEEE C63.19-2011 pdf download IEEE Standards

IEEE C63.19-2011 pdf download

IEEE C63.19-2011 pdf download American National Standard Methods of Measurement of Compatibility between Wireless Communications Devices and Hearing Aids .3 Organization and use of the standard These technical requirements specify the measurement methods and categorical levels to...
Read More
IEEE 1609-4-2011 pdf download IEEE Standards

IEEE 1609-4-2011 pdf download

IEEE 1609-4-2011 pdf download IEEE Standard for Wireless Access in Vehicular Environments (WAVE)— Multi-channel Operation control channel (CCH) interval: A specified periodic interval of time with respect to CoordinatedUniversal Time (UTC). During the CCH interval a device...
Read More
IEEE 1725-2012 pdf download IEEE Standards

IEEE 1725-2012 pdf download

IEEE 1725-2012 pdf download IEEE Standard for Rechargeable Batteries for Cellular Telephones 3. Definitions For the purposes of this document, the following terms and definitions apply. The IEEE StandardsDictionary: Glossary of Terms & Definitions should be consulted...
Read More

LEAVE A REPLY

Anonymous netizen Fill in information