IEEE 1031-2001 pdf download IEEE Guide for the Functional Specication of Transmission Static Var Compensators
1. Overview
1.1 Scope
This document provides general guidelines toward the preparation of a functional specification of transmis.sion static var compensators (SVCs) using conventional thyristor technology. Many clauses will be usefulfor compensator systems using gate turn-off (GTO) thyristor technology (static compensator (STATCOM)or other semiconductor devices, or SVCs associated with high-voltage dc (HVDC) converter stations. orindustrial and distribution applications.
General terms and conditions forming the commercial part of a specification for a particular project are out-side the scope of this document.
1.2 Purpose
Starting at Clause 4, this document presents technical clauses that may be used as the basis of a functionalSVC specification. The wording deliberately uses “shouldrather than “shall” because this document is aguide, not a specification. The user of this guide might wish to make this adjustment when convertingclauses into a specification. Annex B of this document contains supplemental information intended to furtherdevelop specific clauses. Further information is referenced by the same subdivision numbering used in the
main text.
1.3 Application
The guide should be considered a general purpose resource and does not include all details needed for aspecific application. Likewise, because transmission SVCs are typically designed to address a specificapplication, not every part of this guide may be applicable. The user of this guide should evaluate how, andto what extent, each clause applies to the development of an SVC specification.
Clause 3 gives definitions such as a static var compensator (SVC), a static var system (SVS), and associatedother reactive elements. This guide applies to the SVC.
2. References
This guide should be used in conjunction with the following publications. When the following standards aresuperseded by an approved revision, the revision shall apply.
Accredited Standards Committee C2-1997, National Electrical Safety Code@,NESC国 1, 2
ANSI Std C63.16-1993.American National Standard Guide for Electrostatic Discharge Tests Methodologiesand Criteria for Electronic Equipment.
BS EN 61803: 1999, Determination of power losses in high-voltage direct current (HVDC) convertor stations.
IEC 60815-05: 1986.Guide for the selection of insulators in respect of polluted conditions.
IEC 61954-09: 1999. Power electronics for electrical transmission and distribution systems-Testing of thy-ristor valves for static VAR compensators.
IEEE Std 18-19921EEE Standard for Shunt Power Capacitors.
IEEE Std 80-1986 (Reaff 1991), IEEE Guide for Safety in AC Substation Grounding.
IEEE Std 139-1988 (Reaff 1999), 1EEE Recommended Practice for the Measurement of Radio FrequencyEmission from Industrial, Scientific, and Medical (ISM) Equipment Installed on User’s Premises.
EEE Std 519-1992,1EEE Recommended Practices and Requirements for Harmonic Control in ElectricPower Systems.
IEEE Std 693-1997,EEE Recommended Practices for Seismic Design of Substations.
IEEE Std 1303-1994, IEEE Guide for Static Var Compensator Field Tests.
IEEE Std C37.90.1-1989 (Reaff 1994), IEEE Standard Surge Withstand Capability (SWC) Tests for Protec-tive Relays and Relay Systems.
3. Definitions, acronyms, and abbreviations
3.1 Definitions
For the purposes of this guide the following technical terms and definitions apply. The IEEE Standard Dictionary of Electrical and Electronics Terms shall be referenced for terms not defined in this clause.
IEEE 1031-2001 pdf download
PS:Thank you for your support!
