IEC PAS 61076-3-111:2002 pdf download Connectors for electronic equipment – Part 3-111: Detail specification for 8-way, shielded and unshielded, free and fixed connectors, for industrial environments for frequencies up to 250 MHz
Scope
This part of IEC 61076-3 covers an 8-way shielded industrial environment connector system of 4,6 or 8 contacts consisting of a range of free and fixed connectors, The connectors cover avariety of different mounting configurations and termination types with a common matingconfiguration.
Fixed connectors are provided with terminations suitable for solder, insulation displacement.
screw terminal, crimp, insulation piercing termination and printed-board mounting.
Free connectors are provided for crimp, insulation piercing and insulation displacementterminations to cable assemblies with tinsel, stranded or solid wire conductors, At the presenttime, free connectors may only be available with a limited range of terminations and variants.
1.1Normative references
The following normative documents contain provisions which, through reference in this textconstitute provisions of this part of IEC 61076-3. At the time of publication, the editions indicatedwere valid All normative documents are subject to revision, and parties to agreements based onthis part of IEC 61076 are encouraged to investigate the possibility of applying the most recenteditions of the normative documents indicated below. Members of IEC and ISO maintainregisters of currently valid Intemational Standards.
IEC 60050(581): 1978, Internationa/ Electrotechnica/ Vocabulary (1EV)- Chapter 581: Electrommechanica/ components for electronic eqwioment
EC 60603-7, Connectors for frequencies below 3 MHz for use with printed boards – Part 7.Defail specification for conneclors, 8-way, including fixed and free conneclors with commonmafing feafures, wifh assessed quality
IEC 60068-1: 1988, Environmental testing – Part 1: General and guidance
IEC 60326-3: 1991, Printed boards – Part 3: Design and use of printed boards
IEC 60352-2: 1990, Solderless connections – Part 2: Solderless crimped connections 口 Generalrequirements, test methods and practical guidance
EC 60352-3: 1993, Solderless connections – Part 3: Solderless accessible insulationdisplacement connections 口 General requirements, test methods and practical guidance
EC 60352-4: 1994, Solderless connections – Part 4: Solderless non-accessible insulationdisplacement connections – General requiremments, fest methods and practical guidance
IEC 60410:1973,Sampling plans and procedures for inspection by attributes
EC 60512-2: 1985, Electromechanical components for electronic equipment, basic testingprocedures and measuring methods – Part 2: General examination, electrical continuity andcontact resistance tests, insulation tests and voltage stress tests
EC 60512-3: 1976, Electromechanical components for electronic equipment; basic testingprocedures and measuring methods – Part 3: Current-carrying capacity tests
EC 60512-4: 1976, Electromechanical components for electronic equipment; basic testingprocedures and measuring methods – Part 4: Dynamic stress tests
EC 60512-5: 1992,Electromechanical components for electronic equipment; basic testingprocedures and measuring methods – Part 5: lmpact tests (free components), static load tests(fixed components) endurance tests and overload tests
EC 60512-6: 1984, Electromechanical components for electronic equipment; basic testingprocedures and measuring methods – Part 6: Climatic tests and soldering tests
EC 60512-7: 1988Electromechanical components for electronic eauipment: basic testinoprocedures and measuring methods – Part 7: Mechanical operating tests and sealing tests
EC 60512-8: 1993, Electromechanical components for electronic equipment; basic testingprocedures and measuring methods – Part 8: Connector tests (mechanical) and mechanical testson contacts and terminations
IEC 60529: 1989, Degrees of protection provided by enclosures
EC 60603-1: 1991, Connectors for frequencies below 3 MHz for use with printed boards -Part 1: Generic specification – General requirements and guide for the preparation of detailspecifications,with assessed qualityAmendment 1(1992)
EC 60664-1: 1992, Insulation coordination for equipment within low-voltage systems – Part 1:Principles,requirements and tests
EC 60807-1: 1991, Rectangular connectors for frequencies below 3 MHz – Part 1: Genericspecification – General requirements and guide for the preparation of detail specifications forconnectors with assessed quality
ITU-T K20: 1984,Resistibility of telecommunication switching equipment to overvoltages andovercurrents
ISO 1302，Technical drawings – Method of indicating surface texture
IEC PAS 61076-3-111:2002 pdf download
PS:Thank you for your support!
