SAE J2042-2000 pdf download Clearance, Sidemarker, and Identification Lamps for Use on Motor Vehicles 2032 mm or More in Overall Width
Scope-This SAE Standard provides test procedures requirements. and guidelines for clearancesidemarker, and identification lamps intended for use on vehicles 2032 mm or more in overall width.Eclearance lamp, sidemarker lamps, or an identification lamp conforming to the requirements of this documentmay be used on vehicles less than 2032 mm in overall width.
References
Applicable Publications–The following publications form a part of this specification to the extent specified2herein. The latest issue of SAE publications shall apply.
2.1.1SAE PUBLICATIONS-Available from SAE, 400 Commonwealth Drive, Warrendale, PA 15096-001.
SAE J576-Plastic Material for Use in Optical Parts Such as Lenses and Reflectors of Motor VehicleLighting DevicesSAE J578Color Specification
SAE J759-Lighting ldentification Code
SAE J2139-Tests for Lighting Devices, Reflective Devices, and Components Used on Vehicles 2032 mmor More in Overall Width
2.2Related Publications–The following publications are provided for information purposes only and are not arequired part of this document.
2.2.1SAE PUBLICATIONS-Available from SAE, 400 Commonwealth Drive, Warrendale, PA 15096-0001.
SAEJ387-Terminology-Motor Vehicle Lighting
SAE J567-Lamp Bulb Retention System
SAE J592-Clearance, Sidemarker, and ldentification Lamps
SAE J1889-L.E.D.Lighting Devices
2.2.2OTHER PUBLICATIONS-Attention is called to the following documents for additional information on lampdesign and installation requirements.
2.2.2.1 FMVSS Publications-Available from the Superintendent of Documents, U. S. Government Printing OfficeMail Stop:SSOP,Washington, DC 20402-9320.
Federal Motor Vehicle Safety Standards 49CFR 571.108Federal Highway Administration 49CFR Part 393 Subpart B
2.2.2.2 Truck Trailer Manufacturers Association Publication一Availablefrom Truck TrailerManufacturersAssociation,1020 Princess Street,Alexandria,VA 22314-2247
Truck Trailer Manufacturers Association RP-9
2.2.2.3 The Maintenance Council Publication-Available from The Maintenance Council，American TruckingAssociations.2200 Mill Road，Alexandria,VA 22314-5388.
The Maintenance Council RP-702
3Definitions
3Clearance Lamp–A clearance lamp provides light to the front or rear of a vehicle to indicate the overall widthand height.
3.2Sidemarker Lamp–A sidemarker lamp provides light to the side of a vehicle to indicate the overall length otthe vehicle. Additional sidemarker lamps may also be mounted at intermediate locations on the side of thevehicle. The rear sidemarker lamp used on a trailer is also referred to as a tracking lamp.
dentification lamp–An identification lamp is a group of three lamps in a horizontal row which provide light tothe front or rear or both, having a light center spacing of not less than 150 mm nor more than 300 mm apart, toidentify vehicles 2032 mm or more in overall width.
3.4Combination Clearance and Sidemarker Lamp–A combination clearance and sidemarker lamp is a singleamp which simultaneously meets the requirements of a clearance and a sidemarker lamp.
Lighting ldentification Code-Clearance, sidemarker, or identification lamps may be identified by the codeP3″: combination clearance and sidemarker lamps may be identified by the code “PC2.” in accordance withSAE J759.
5Tests
51SAE J2139 is a part of this document. The following tests are applicable with modification as indicated
5.1.1ViBRATION
5.1.2MOISTURE
5.1.3DusT
5.1.4CORROSION

Share on Facebook

Post on X

Follow us

Save