SAE AS 14241-2000 pdf download

12-27-2022 comment

SAE AS 14241-2000 pdf download CLAMP, LOOP TYPE, CUSHIONED SUPPORT, METRIC
1.MATERIAL:
a)BAND
THE BAND SHALL BE FABRICATED EROM ALUMINUM ALLOY.OR CORROSION RESISTANT STEEL INACCORDANCE WITH THE PROCUREMENT DOCUMENT.
b) CUSHION THE CUSHION SHALL BE FABRICATED FROM ETHYLENE PROPYLENE,NITRILE, CHLOROPRENESILICONE OR FLUOROSILICONE IN ACCORDANCE WITH PROCUREMENT DOCUMENT.
2. FINISH: ALUMINUM ALLOY SHALL BE FINISHED BY CHEMICAL CONVERSION PROCESSAND CORROSION RESISTANTSTEEL SHALL BE PASSIVATED IN ACCORDANCE WITH THE PROCUREMENT DOCUMENT.
3. THE WEDGE SHALL BE INTEGRALLY MOLDED TO CUSHIO USING PRESSURE AND HEAT TO ACCOMPLISH A BONDBETWEEN CUSHION AND WEDGE
THE WEDGE SHALL OVERLA AND TOUCH THE OPPOSITE END OF THE CUSHION WHEN CLAMP MOUNTING HOLES4ARE ALIGNED AND THE CLAMP IS COMPLETELY CLOSED.
5. COLOR OF CUSHION -THE IDENTIFYING COLOR OF THE VARIOUS CUSHION MATERIALS SHALL BE AS FOLLOWS:
a) ETHYLENE PROPYLENE – SOLID PURPLE
b) NITRILE-SOLID YELLOW.
C) CHLOROPRENE BLACK WITH A BLUE IDENTIFIER (SEE PROCUREMENT SPECIFICATION)
d) SILICONE -NATURAL WHITE
e) FLUOROSILICONE-SOLID BLUECUSHION SELECTION GUIDE
ETHYLENE PROPYLENE RECOMMENDED FOR USE IN AREAS CONTAMINATED WITH PHOSPHATE ESTERaHYDRAULIC FLUID AND OTHER SYNTHETIC FLUIDS.EXCELLENT OZONE RESISTANCE. NOT RESISTANT TOPETROLEUM BASED FLUIDS.
NITRILE -RECOMMENDED FOR USE PRIMARILY IN FUEL IMMERSION AND FUEL VAPORS. GOOD OZONEb)RESISTANCE. NOT RESISTANT TO PHOSPHATE ESTER BASED FLUIDS.NOT FOR USE WITH TITANIUMTUBING
CHLOROPRENE – RECOMMENDED FOR GENERAL PURPOSE USE IN AREAS CONTAMINATED WITH9PETROLEUM BASED HYDRAULIC FLUID AND OCCASIONAL FUEL SPLASH EXCELLENT OZONE RESISTANCENOT RESISTANT TO PHOSPHAE ESTER BASED FLUIDSNOT FOR USE WITH TITANIUM TUBING
SILICONE RECOMMENDED FOR USE AT ELEVATED TEMPERATURES IN PHOSPHATE ESTER BASED FLUIDdAND OTHER SYNTHETIC FLUID CONTAMINATED AREASUNAFFECED BY OZONE NOT RESISTANT TOPETROLEUM BASED FLUIDS
eFLUOROSILICONE RECOMMENDED FOR USE AT ELEVATED TEMPERATURES IN PETROLEUM BASED FLUIDCONTAMINATED AREAS. UNAFFECTED BY OZONE. NT RESISTANT TO PHOSPHATE ESTER BASED FLUIDS

                                           Related Information                                             Download
PS:Thank you for your support!
SAE AS 39029-79-2000 pdf download SAE Standards

SAE AS 39029-79-2000 pdf download

SAE AS 39029-79-2000 pdf download CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, SHIELDED (FOR MIL-C-28748/9 CONNECTORS) REQUIREMENTS: Dimensions, design characteristics, and configuration: See figure 1 and table I. Tools: See table II. Preparation of samples: Contacts shall be...
Read More
SAE AS 39029-83-2000 pdf download SAE Standards

SAE AS 39029-83-2000 pdf download

SAE AS 39029-83-2000 pdf download CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR MIL-C-28840 CONNECTORS) REQUIREMENTS: Dimensions, design characteristics, and configuration: See figure 1 and table I. Tools: See table II. Localized finish option: Applicable contacts shall be...
Read More
SAE AS 39029-84-2000 pdf download SAE Standards

SAE AS 39029-84-2000 pdf download

SAE AS 39029-84-2000 pdf download CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR MIL-C-28840 CONNECTORS) This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the Synchros described...
Read More

LEAVE A REPLY

Anonymous netizen Fill in information