SAE AS 39029-63-2000 pdf download CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR MIL-C-24308 CONNECTORS)
NOTES:
1. Dinensions are in inches.
2. Metric equivalents are given for general information only.
3. Dinensions are after plating.
4. Machined surfaces to have 63 or better per USASI B46.1 unless otherwise specified.
5. Remove all burrs and sharp edges .003 (0.08 mm) maximum unless otherwise specified.
6. All diameters to be concentric with each other within . 004 (0.10 mm) TIR.
7. The mechanical pressure member shall be shrouded. Hoods, if used, shall conform to the requi rements specified herein.
8. Maximum gap of .10 inch (2.54 mm) between hood and body of contact.
9. Patent notice. The Government has a royalty free license under the u.s. patents listed below for the benefit of manufacturers of the items disclosed and described herein, either for the Government or for use in equipment delivered to the Government . Patent numbers 3110093 expires November 12, 1980 3158424 expires November 24, 1981 10. Copyright notice. All information disclosed in this specification sheet which is or may be copyrighted by 1TT Cannon Electric is reproduced herein with the express permission of the copyright owner.
SAE AS 39029-63-2000 pdf download
PS:Thank you for your support!
