AIA/NAS 1025-2012 pdf download NUT, SELF-LOCKING, PLATE, ONE LUG, REGULAR HEIGHT, NON-CSK
MATERIAL: SEE SPECIFICATION MIL-N-25027 NASM25027.
NOTES: /1 / THE CENTER OF THE TAPPED HOLE SHALL NOT DEVIATE IN ANY DIRECTION FROM THE CENTER OF THE PLATE NUT AS DETERMINED BY THE RIVET HOLES BY MORE THAN .005.
/2/ MINIMUM “B” AND “E” LIMITED ONLY BY STRENGTH REQUIREMENT OF SPECIFICATION.
/3/ NUTS FOR USE BY WELDING TO HAVE WELDING PROJECTIONS WITH SPACING EQUAL TO RIVET SPACING ±.005.
/4/ FOR DIMPLED RIVET TYPE ONLY, “ØK” TOLERANCE +.01 5 – .000 AFTER FORMING.
/5/ THREADS IN ACCORDANCE WITH AS8879 BEFORE LUBRICATION.
(6) DIMENSIONS IN INCHES AND APPLY AFTER FINISH AND PRIOR TO THE APPLICATION OF LUBRICATION UNLESS OTHERWISE SPECIFIED.
(7) “NX” CODE INACTIVE FOR NEW DESIGN AFTER 1 JULY 1 972.
(8) “N”, “A” AND “C” CODES INACTIVE FOR NEW DESIGN AFTER 1 JANUARY 1 989. USE NASM21 080,NASM21 051 AND NASM21 052 RESPECTIVELY. FOR DESCRIPTION OF STATUS NOTES, SEE NAS380.
(9) THIS STANDARD TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.
(1 0) UNLESS OTHERWISE SPECIFIED, PART INVENTORY MANUFACTURED TO PREVIOUS REVISIONS OF THE APPLICABLE DRAWING OR SPECIFICATION MAY BE PROCURED AND USED UNTIL STOCK IS DEPLETED.
(1 1 ) UNLESS OTHERWISE SPECIFIED HEREIN, REFERENCED DOCUMENTS SHALL BE THE ISSUE IN EFFECT ON DATE OF MANUFACTURE. HOWEVER, EXISTING MATERIAL INVENTORY CERTIFIED TO A PREVIOUS REVISION OF THE APPLICABLE MATERIAL SPECIFICATION(S) IS ACCEPTABLE FOR USE UNTIL DEPLETION.
(1 2) DIMENSIONING AND TOLERANCING PER ANSI Y1 4.5M-1 982.
AIA/NAS 1025-2012 pdf download
PS:Thank you for your support!
