AIA/NAS 1027-2012 pdf download NUT, SELF-LOCKING, PLATE, CORNER, REGULAR HEIGHT, NON-CSK
AL ALLOY – ANODIZE OR CHEMICAL FILM PER NASM25027, EXCEPT ANODIZE SHALL BE LIMITED TO TYPE I OR TYPE II.
FOR DIMPLED RIVET TYPE ONLY，“OK”TOLERANCE +.015 – .000 AFTER FORMING
MINIMUM BASE AREA AND EIGHT LIMITED ONLY BY STRENGTH REQUIREMENT OF SPECIFICATION.THREADS IN ACCORDANCE WITH AS8879 BEFORE LUBRICATION
DIMENSIONS IN INCHES AND APPLY AFTER FINISH AND PRIOR TO THE APPLICATION OFLUBRICATION UNLESS OTHERWISE SPECIFIED.
“NX”CODE INACTIVE FOR NEW DESIGN AFTER 1 JULY 1972
“N”，“A”AND “C”CODES INACTIVE FOR NEW DESIGN AFTER 1 JANUARY 1989.USE MS21081,MS21055,AND MS21056 RESPECTIVELY. FOR DESCRIPTION OF STATUS NOTES, SEE NAS380.
THIS STANDARD TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.
UNLESS OTHERWISE SPECIFIED.PART INVENTORY MANUFACTURED TO PREVIOUS REVISIONS OFTHE APPLICABLE DRAWING OR SPECIFICATION MAY BE PROCURED AND USED UNTIL STOCK IS
DEPLETED.
UNLESS OTHERWISE SPECIFIED HEREIN,REFERENCED DOCUMENTS SHALL BE THE ISSUE IN EFFECTON DATE OF MANUFACTURE. HOWEVER, EXISTING MATERIAL INVENTORY CERTIFIED TO A PREVIOUSREVISION OF THE APPLICABLE MATERIAL SPECIFICATION(S) IS ACCEPTABLE FOR USE UNTILDEPLETION.
DIMENSIONING AND TOLERANCING PER ANSI Y14.5M-1982

Share on Facebook

Post on X

Follow us

Save