AIA/NAS 1046-2012 pdf download CLIP, WIRE ROPE, FORGED CARBON STEEL, FOR GROUND SUPPORT EQUIPMENT
MATERIAL:
FORGED CARBON STEEL; SEE PROCUREMENT SPECIFICATION.
FINISH:
ZINC COATING; SEE PROCUREMENT SPECIFICATION, EXCEPT IF THE HOT DIP (GALVANIZING) PROCESS IS USED, THE COATING SHALL BE APPLIED IN ACCORDANCE WITH ASTM A1 53/A1 53M.
NOTES:
(1 ) THE THREADS IN U BOLTS SHALL BE ROLLED OR CUT AT THE OPTION OF THE MANUFACTURER.
THREADS SHALL BE UNC-2A (EXTERNAL) AND UNC-2B (INTERNAL) IN ACCORDANCE WITH FED-STD-H28.
(2) DIMENSIONS IN INCHES AND APPLY AFTER FINISH UNLESS OTHERWISE SPECIFIED.
(3) TOLERANCES TO BE HELD WITHIN COMMERCIAL STANDARDS OF THE AMERICAN DROP FORGING ASSOCIATION.
(4) THIS STANDARD TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.
(5) UNLESS OTHERWISE SPECIFIED, PART INVENTORY MANUFACTURED TO PREVIOUS REVISIONS OF THE APPLICABLE DRAWING OR SPECIFICATION MAY BE PROCURED AND USED UNTIL STOCK IS DEPLETED.
(6) UNLESS OTHERWISE SPECIFIED HEREIN, REFERENCED DOCUMENTS SHALL BE THE ISSUE IN EFFECT ON DATE OF MANUFACTURE. HOWEVER, EXISTING MATERIAL INVENTORY CERTIFIED TO A PREVIOUS REVISION OF THE APPLICABLE MATERIAL SPECIFICATION(S) IS ACCEPTABLE FOR USE UNTIL DEPLETION.
(7) DIMENSIONING AND TOLERANCING PER ANSI Y1 4.5M-1 982.
PROCUREMENT SPECIFICATION:
FF-C-450, TYPE I, CLASS 1 .

Share on Facebook

Post on X

Follow us

Save