AIA/NAS 2014-2012 pdf download PIN, RIVET, GROOVED, AND COLLAR, FOR COMPOSITE MATERIALS
Purpose, This specification establishes the requirements for Titanium Pul-Type and Stump-Type Flush andProtruding Head, Pin, Rivet,Grooved, and Titanium Collar,Grooved, Pin, Rivet as permanent attachment fastenerson composite materials.
Classification. The pins and collars covered by this specification shall be of the types, sizes, and materialsdesignated by the part number specified on the applicable NAS part standards.
REFERENCED DOCUMENTS
Applicable documents. The following documents, of the issue in effect on date of invitation for bids or request forproposal, form a part of this specification to the extent specified herein (see 6.5).
Governmental
MIL-STD-129MIL-STD-2073/1
Marking for Shipment and Storage
Standard Practice for Military Packaging
Copies can be obtained from the Department of Defense Single Stock Point (DODSSP). http://dodssp.daps.dla.mil
2.1.2 Non-Governmental
American Society for QualityANSI/ASQ Z1.4
Sampling Procedures and Tables for Inspection by Attributes
Copies can be obtained from the American Society for Quality. 600 North Plankinton Ave.. Milwaukee, WI 53203.
www.asg.org
ASTM InternationalASTM B348
Commercially Pure TitaniumStandard Specification for Pressure-Sensitive Tape for Packaging, Box Closure, and SealingStandard Practice for Commercial PackagingMethods for Chemical Analysis of Titanium and Titanium AlloysStandard Practice for Liquid Penetrant Testing
ASTM D5486/D5486MASTM D3951
ASTM E120
ASTM E1417
Copies can be obtained from ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA19428-2959.www.astm.org
SAE International
Chemical Check Analysis Limits,Titanium and Titanium AlloysTitanium Alloy Bars and Forgings,6AI-4V Annealed,Heat TreatableHeat Treatment of Titanium and Titanium Alloys
AMS2249AMS4967
AMS-H-81200
Copies can be obtained from SAE International,400 Commonwealth Dr.. Warrendale, PA 15096-0001wwwsae.org
ASME
ASME B46.1
Surface Texture (Surface Roughness, Waviness, and Lay)
Copies can be obtained from ASME, Three Park Ave., New York, NY 10016-5990. www.asme.org

Share on Facebook

Post on X

Follow us

Save