AIA/NAS 1000-2012 pdf download TUBE END, STANDARD DIMENSIONS FOR INSIDE DOUBLE FLARE
FOR USE WITH MS，AN AND NAS STANDARD TUBE FITTINGSFLARE SHALL BE SQUARE WITH CENTERLINE OF TUBEFLARE SHALL BE FREE FROM CRACKS AND PIT MARKS.FLARE SHALL BE CONCENTRIC WITH OD OF TUBE WITHIN .005 FULL INDICATOR MOVEMENT.DIMENSIONS IN INCHES
THE RETURN LIP OF THE FLARE MAY BE AS LARGE IN DIAMEER AS TO COINCIDE WITH THE INSIDEDIAMETER OF THE PERMISSIBLE MINIMUM WALL OF THE MAX OD TUBE PLUS .040, AND MAY BE ASSMALL AS THE MINIMUM INSIDE DIAMETERS OF THE TABLE.
TOLERANCES UNLESS OTHERWISE SPECIFIED: ANGLES 1/2
THIS STANDARD TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.
UNLESS OTHERWISE SPECIFIED PART INVENTORY MANUFACTURED TO PREVIOUS REVISIONS OF THEAPPLICABLE DRAWING OR SPECIFICATION MAY BE PROCURED AND USED UNTIL STOCK IS DEPLETED
UNLESS OTHERWISE SPECIFIED HEREIN, REFERENCED DOCUMENTS SHALL BE THE ISSUE IN EFFECT ONDATE OF MANUFACTURE. HOWEVER EXISTING MATERIAL INVENTORY CERTIFIED TO A PREVIOUSREVISION OF THE APPLICABLE MAERIAL SPECIFICATION(S) IS ACCEPTABLE FOR USE UNTILDEPLETION.
DIMENSIONING AND TOLERANCING PER ANSI Y145M-1982

Share on Facebook

Post on X

Follow us

Save