AIA/NAS 1028-2012 pdf download NUT, SELF-LOCKING, PLATE, CORNER, REGULAR HEIGHT, CSK
CODES CONTAINING“X”OR“N”CADMIUM PLATE.“ACODE: CADMIUM PLATE PLUS ANAPPROVED DRY FILM LUBRICANT. PLATING SHALL BE AMS-QQ-P-416,TYPE II, CLASS 2EXISTING NUTS WITH AN OPTIONAL TYPE AND CLASS OF CADMIUM PLATE PERAMS-QQ-P-416,AS PREVIOUSLY PERMITTED,MAY BE FURNISHED UNTIL 16 DEC 1976.
SILVER PLATE FOR 800F USE PER NASM25027 TO A 0002 MINIMUM THICKNESS ONSURFACES WHICH CAN BE TOUCHED BY A 7500 (3/4-INCH) BALLTHREADS SHALLSHOW COMPLETE COVERAGE, BUT THICKNESS EQUIREMENT ON THREADS IS WAIVED
ANODIZE OR CHEMICAL FILM PER NASM25027. EXCEPT ANODIZE SHALL BE LIMITED TOTYPE I OR TYPE II
FOR DIMPLED RIVET TYPE ONLY，“OK TOLERANCE +.015 – .000 AFTER FORMING
MINIMUM BASE AREA AND HEIGHT LIMITED ONLY BY STRENGTH REQUIREMENT OF SPECIFICATION.
THREADS IN ACCORDANCE WITH AS8879 BEFORE LUBRICATION.
DIMENSIONS IN INCHES AND APPLY AFTER FINISH AND PRIOR TO THE APPLICATION OFLUBRICATION UNLESS OTHERWISE SPECIFIED.
“NX”CODE INACTIVE FOR NEW DESIGN AFTER 1 JULY 1972.
THIS STANDARD TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.
UNLESS OTHERWISE SPECIFIED. PART INVENTORY MANUFACTURED TO PREVIOUS REVISIONS OFTHE APPLICABLE DRAWING OR SPECIFICATION MAY BE PROCURED AND USED UNTIL STOCK ISDEPLETED
UNLESS OTHERWISE SPECIFIED HEREIN, REFERENCED DOCUMENTS SHALL BE THE ISSUE IN EFFECTON DATE OF MANUFACTURE.HOWEVER, EXISTING MATERIAL INVENTORY CERTIFIED TO A PREVIOUSREVISION OF THE APPLICABLE MATERIAL SPECIFICATIONS) IS ACCEPTABLE FOR USE UNTILDEPLETION.
DIMENSIONING AND TOLERANCING PER ANSI Y14.5M-1982

Share on Facebook

Post on X

Follow us

Save