AIA/NAS 1738-2012 pdf download RIVET, BLIND, PROTRUDING HEAD, MECHANICALLY LOCKED SPINDLE, BULBED
CODE:
“A AFTER BASIC PART NUMBER FOR TYPE A RIVETS INDICATES 2219-T62 ALUMINUM ALLOY SLEEVE
AND NICKEL ALLOY 600 SPINDLE
“B” AFTER BASIC PART NUMBER FOR TYPE B RIVETS INDICATES 5056 ALUMINUM ALLOY SLEEVE AND
ALLOY STEEL SPINDLE
“C” AFTER BASIC PART NUMBER FOR TYPE C RIVETS INDICATES NICKEL ALLOY 600 SLEEVE AND A286
CRES SPINDLE
“E” AFTER BASIC PART NUMBER FOR TYPE E RIVETS INDICATES 5056 ALUMINUM ALLOY SLEEVE AND
NICKEL ALLOY 600 SPINDLE
“M” AFTER BASIC PART NUMBER FOR TYPE M RIVETS INDICATES NICKEL-COPPER SLEEVE AND NICKEL
ALLOY 600 SPINDLE
“W”AFTER RIVET TYPE CODE LETTERS COR “M”INDICATES CADMIUM PLATED SLEEVE
EXAMPLE OF PART NUMBER:
NAS1738 B5-45056 ALUMINUM ALLOY RIVET,ALLOY STEEL SPINDLE, D.173 WITH .188 TO .2501GRIP RANGE
GRIP DASH NUMBER
DIAMETER DASH NUMBER
RIVET TYPE
BASIC PART NUMBER
NOTE:
.001 SHANK DIA INCREASE PERMISSBLE WITHIN .100 INCH OF BASE OF HEAD/1/
RIVETS WITH GRIPS GREATER THAN THEIR DIAMETER ARE NOT REOUIRED TO MEET EXPANSIONREOUIREMENTS OF PROCUREMENT SPECIFICATION. NAS1398 RIVETS WILL PROVIDE MORE POSITIVEHOLE FILL FOR LONGER GRIPS.
THE EMBRITTLEMENT RELIEF BAKE SHALL BE 3 HOURS MINIMUM FOR THESE PARTS THE NOTCH TESTIS NOT REOUIRED.
COLOR: 5056 OR 2219 ALUMINUM ALLOY RIVET SLEEVES SHALL BE NATURAL IN COLOR
DIMENSIONS IN INCHES ND APPLY AFTER FINISH UNLESS OTHERWISE SPECIFIED.
THIS STANDARD TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN
UNLESS OTHERWISE SPECIFIED, PART INVENTORY MANUFACTURED TO PREVIOUS REVISIONS OF THEAPPLICABLE DRAWING OR SPECIFICATION MAY BE PROCURED AND USED UNTIL STOCK IS DEPLETED
UNLESS OTHERWISE SPECIFIED HEREIN, REFERENCED DOCUMENTS SHALL BE THE ISSUE IN EFFECT ONDATE OF MANUFACTURE.HOWEVER, EXISTING MATERIAL INVENTORY CERTIFIED TO A PREVIOUS

Share on Facebook

Post on X

Follow us

Save