AIA/NAS 537-2010 pdf download BUSHING, SLEEVE, PRESS FIT, UNDERSIZE INSIDE DIAMETER
MATERIAL:
FINISH:
CODES:
ALLOY STEEL – 4130 (UNS G41300) PER ML-S-758 AMS-S-6758 OR 8630 UNS G86300) PER MHL-S-6050AMS6280 OR EQUIVALENT. HEAT TREATED PER AMS2759 TO 125.000 – 145.000 PSL SEAMLESS ALLOYSTEEL TUBING MAY BE USED AS AN OPTIONAL MATERIAL PROVIDED THE FINISHED PRODUCT MEETS ALLOTHER REQUIREMENTS OF THIS DRAWING
CRES 17-4PH PER AMS5643 (UNS S17400), PRECIPIATION HEAT TREAT PER AMS-H-6875 AMS2759 TOCONDITION H 1025.
ALUMINUM-SILICON BRONZE ALLOY UNS C64200) PER OO-G-465 ALLOY 42 ASTM B 150/B 150MCONDITION HR50 (TENSILE TEST. CERTIFICATION AND MILL TEST REPORTS REQUIRED)
ALLOY STEEL.CADMIUM PLATING PER AMS-QQ-P-416TYPE II.CLASS 2
CRESPASIVATION PER AMS2700，METHOD 1.CLASS 4.
ALUMINUM-SILICON BRONZE, CADMIUM PLATING PER AMS-QQ-P-416 TYPE I. CLASS 2. DYED A LIGHTYELLOW COLOR WHICH WILL NOT RUB OFF BY CONACT INCIDENTAL TO HANDLING AND SERVICE ANDSHALL NOT BE INJURIOUS TO THE MATERIAL.HOLES ARE ACCEPTABLE PLATEDUNPLATED OR WITH INCOMPLETE PLATING
ALUMINUM COAT PER NAS4006OUTSIDE DIAMETER ONLY，NO OVERSPRAY.
ALUMINUM-SILICON BRONZE ALUMINUM COAT DED LIGHT BLUE COLOR ON ONE END WITH COLORWHICH WILL NOT RUB OFF BY CONTACT INCIDENTAL TO HANDLING AND SERVICE AND SHALL NOT BEINJURIOUS TO THE MATERIAL.
FIRST DASH NUMBER INDICATES SIZE.DIAMETER
SECOND DASH NUMBER INDICATES LENGTH, IN .010 INCH INCREMENTS.(USE THREE DIGIT CALLOUT)
MATERIAL IS INDICATED BY LETTER FOLLOWING THE BASIC NUMBER“_”(NO LETTER)INDICATES ALLOY STEEL”B”INDICATES ALUMINUM-SILICON BRONZE“C”INDICATES CRES
FINISH IS INDICATED BY A LETTER BETWEEN THE FIRST AND SECOND DASH NUMBER.”P”INDICATES CADMIUM PLATING
“A”INDICATES ALUMINUM COAT
“”INDICATES NO FINISH (CRES IS PASSIVATED)
“W”FOLLOWING THE SECOND DASH NUMBER INDICATES BUSHING WITHOUT CHAMFERS ON INSIDEDIAMETER
AIA/NAS 537-2010 pdf download
PS:Thank you for your support!
