ASME A112.18.2:2002 pdf download PLUMBING FIXTURE WASTE FITTINGS
1 GENERAL
1.1 Scope
This Standard establishes performance rcquiremcntsand test mcthods for plumbing fxturc waste fittingssuch as, but not limited to: bathtub waste and overflowdrains; traps; trap wall adapters; fixture strainers anddrains; pop-up assemblies; continuous waste assembliesand other tubular eomponents.
1.2 Units of Measurements
Values are stated in U.S. Customary units and inthe International System of Units (SI), The U.S. Custom-ary units shall be considered as the standard.In this Standard, gajions (U.S. Liqujd) per minuteis abbrevialed gpin, and liters (mnetric liquid) per mninuteis abbreviated L/min.
1.3 lllustrations
Illustrations included in this Standard are providedto show, in general, the type of product described inthe Standard (see Figs. 1 through 10). Except for thecritical dimensions in Figs. 7 and 9, these figures arenot intended to convey mandatory requirements notstated in the text.
1.4 References
The following documents form a part of this Standardto the extent specified herein, The latest issue shall applyASMEA112.18.1Plumbing Fixture FittingsASME A112.19.1M，Enameled Cast Iron Plumbing
Fixtures
ASME A11219.2M Vitreous China Plumbing FixturesASME A112.19.3Stainless Steel Plumbing Fixtures(Designed for Residential Use)ASME A112.19.4M, Purcelain Enarmeled Formmed SieeiPlummbing FixturesASMEA112.19.9MNon-Vitrcous Ceramic Plumbing
PixturesASME B1.20.1,Pip Thrcads,Gencral Purposc (Inch)ASME B16.23, Cast Copper Alloy Solder Joint DrainagcFittings- DWV
ASME B16.29,Wrought Copper and Wrought CopperAlloy Joint Drainagc Fittings – DWVPublisher: American Society of. Mechanical Engineers(ASME)Three Park Avenue.New YorkNY 10016Order Department: 22 Law Drive, Box 2300, FairfieldNJ 07007-2300
ANSI Z124.3，Plastic Lavatories
ANSI Z124.6，Plastic Sinks
ANSI Z124.9，Plastic Urinal Fixtures
Publisher: International Association of Plumbing andMechanicai Officiais (IAMPO)20001 South WainutDrive，WalnulCA91789
ASTM B 117，Operating Salt Spray (Fog) ApparatusASTM B 456,Electrodeposited Coatings of Copper PlusNickel Plus Chromjum and Nickel Plus ChromiumASTM B 604、Decorative Electroplated Coatings ofCopper Pius Nickei Pius Chromniurn on PiasticsASTM D 2661，Acrylonitrile-Butadiene-Styrene (ABS)Schedule 40 Plastic Drain,Wasteand Vent Pipeand FittingsASTM D 2665，Poly (Vinyl Chloride) (PVC) PlasticDrain, Wastc,and Vent Pipe and FittingsASTM F 40)，Thcrmoplastic Accessiblc and Replacc-ment Platic Tube and Tubular FittingsASTM F 628，Acrylonitrile-Butadiene-Styrene (ABS)Schedule 40 Plastic Drain, Waste, and Vent PipeWith a Celular Core
ASTM F 891, Coextruded Poly (Vinyl Chloride)(PVC)Plastic Drain, Waste, and Vent Pipe With a Cellular Core
ASTM F 1498, Taper Pipe Threads 60 for Thermoplas.tic Pipe and Fittings
Publisher: American Society for Testing and Materials(ASTM)，100 Barr Harbor Drive,West Consho-hocken，PA 19428
CSA B 45 Series,Plumbing FixturesCSA B 125，Plumbing Fittings
CSA B 158.1, Cast Brass Soider Joint Drainage, Wasie
and Vent FittingsCSA B 1800 Scries,Plastic Nonpressure Pipe Com-
pendium
ASME A112.18.2:2002 pdf download
PS:Thank you for your support!
