ASME B29.16m:1995 pdf download WELDED STEEL TYPE MILL CHAINS, ATTACHMENTS, AND SPROCKET TEETH
1 DEFINITION
welded steel type mill chains: a series of identicalwelded offset links having barrels to contact the sprocketteeth, and pins which articulate in the barrels of thelinks. Pins are fixed in the sidebar pitch holes by eitherpress fits and/or mechanical locks, such as flats， toprevent rotation of the pins in the sidebar pitch holes
2 GENERAL CHAIN PROPORTIONS ANDDESIGNATIONS
2.1 Minimum Ultimate Tensile Strength
Minimum Ultimate Tensile Strength (M.U.T.S.) forchain covered by this Standard, is the minimumn forceat which an unused, undamaged, chain could fail whensubjected to a single tensile loading test.(a) WARNING: The Minimum Ultimate TensileStrength is NOT a“working load” The MU.T.S greatly exceeds the maximum force that may be safelyapplied to the chain.(b) Test Procedure. A tensile force is slowly applied,in uniaxial direction, to the ends of the chain sample.(c) The tensile test is a destructive test. Even thoughthe chain may not visibly fail when subjected to theMinimum Ultimate Tensile Force, it will have beendamaged and will be unfit for service.
2.2 Measuring Load
Measuring load should be 5 times the weight of 10feet of chain, rounded to the nearest 100 pounds.
2.3 Dimensions for Chain Links
To assure interchangeability of links as producedby different makers of chain, standard maximum andminimum dimensions are adopted. They are not actualdimensions used in manufacturing, but limiting dimen-sions, maximum or minimum,required to assure thedesired interchangeability. However, due to minor varia-tions in barrel configurations, coupling chains of differ-ent manufacture should be held to a minimum.
ASME B29.16m:1995 pdf download
PS:Thank you for your support!
